The Polar Fine Adjustment Unit is an accessory designed to install star tracking mounts such as POLARIE,
and AP Star Tracker System by attaching between photographic tripod and the star tracking mount.
This device allows to make fine adjustment in horizontal and vertical direction when installing a polar axis scope.
■ The pan-mount head which is exclusively designed to precisely fit to the bottom of star trackers can be secured or removed with a single screw.
■ The twin screw system for both tilt-angle and azimuth adjustment assures fine motion and rigid lock.
■ The widely adjustable tilt-angle from 0゚~85゚ permits a use in variously different location and situations.
1. Place the Polar Fine Adjustment Unit on your camera tripod. Take silver piece from the unit and put it on the bottom of Polarie Star Tracker.
2. Place Polarie Star Tracker on the Polar Adjustment Unit.
3. Fine adjustment range can be changed in three-Steps from low(0-30 degree), middle(30-60 degree) and high(60-85 degree).
Remove screw with hexagon wrench. There are "3 holes" (hidden behind), which allows you to change the steps according to your requirement.
4. The twin screw system for both tilt-angle and azimuth adjustment assures fine motion and rigid lock.
Spezifikationen | Polarie Polar Fine Adjustment Unit |
Product Code | #35519 (EAN umber: 4955295355198) |
Pan-Mount Head | Quick Release Screw Attachment with 1/4" Screw |
Tilt Angle Adjustment | Fine adjustment range: +/-15 degree. Possible in 3-Step from low (0-30 degree), middle(30-60 degree), high (60-85 degree) with twin screw in 3.7 degree per rotation. |
Azimuth Adjustment | Fine adjustment range: +/-15 degree, with twin screw in 5.7 degree per rotation. |
Max.Loading Capacity | Approx. 7kg |
Applicable Tripod | Photographic tripod (using 1/4", 3/8" screw) |
Applicable Instrument | POLARIE Star Tracker, AP Star Tracking System |
Dimentions | 51mm x 73mm x 49mm |
Gewicht | 300 g |