There might be a situation where you have problems with Condensation on camera lens, eyepiece.
If you are looking for a solution, Vixen Heater Wrap Sheet 2 is your answer.
|Material||Active Heat Fabric (AHF) Spezialstoff (handwaschbar)|
~40°C bei 20°C Raumtemperatur
~30°C bei 10°C Außentemperatur
über USB Anschluss (5V, 1A, 7.5W) -*Not included
|Heizdauer||2 - 3 Stunden (@20°C) mit 5000mAh USB Powerbank, 4 - 5,5 Stunden (@20°C) mit 10000mAh USB Powerbank,|
|Abmessungen||450mm x 470mm|
|Mitgeliefertes Zubehör||Magnet-USB Kabel|
■ The heating wrapping cloth with built-in innovative AHF heater with whole surface mild-fastener.
■ The Heater Wrap Sheet II is improved in heating power from conventional 40 to 45 degree celsius. At 20 degree celsius room temp.
■ The heater protects cameras or other equipment from getting humid and night-dew condensation.
■ Also keeps wam batteries to maintain a longer operating duration before use under low temperature.
■ It is also used as a heating blanket or cushion in outdoor.
■ The unique mild-fastener softly holds contents by frictions of fabrics without fixture and being worn out.
■ High-density fine fabrics of the mild-fastener ensure very strong adhesion with minimal contact force.
■ The powerful magnet contact for power supply facilitates attachment and removal.
Fabric used for Vixen Heater Wrap Sheet II is very unique. It's called "Mild Fastener".
The thickness of the Fiber on Hook Surface is approximately 1/100-1/200 compared with general fastener tape.
If it is compared to the density of general fastener tape, it is approximately 275x-100x more dense.
And now, if the Hook surface and the Loop surface of Heater Wrap Sheet 2 is hooked, the total sticking power becomes large.
The sticking power is strong for horizontal direction, but for vertical direction, please pay attention for usage of Heater Wrap Sheet 2. This item is designed to prevent Dew Condensation on camera and lens.
Heating wrapping cloth with built-in innovative AHF heater with whole surface mild-fastener.
Powerful magnet contact for power supply facilitates attachment and removal.
Power source is a general mobile USB battery (5V, 1A, 7.5W).
Wrap up camera body or camera lens with Vixen's heater Wrap Sheet. High-density fine fabric of the mild-fastener ensure very strong adhesion.